Introduction to Cheat sheet CCNA
CCNA or Cisco certified network associate is a certification examination in the area of information technology by Cisco. It is an associate-level Cisco Career certification to enter a network technician job. Some of the common job type after this certification are the following:
- Network engineer
- Network administrator
- Senior network engineer
- Information technology manager
- System administrator
- Information technology director
- System engineer
CCNA Routing and Switching certification is achieved or passed if one earns a passing score on the Cisco exam (code#200-125), or a combined passing score on the “Interconnecting Cisco Network Devices” (ICND1 #100-105) and (ICND2 #200-105) exams. Once ICND1 is passed, a candidate receives CCENT certification. Examination passing marks are set using statistical analysis of obtained marks by all candidates. Pass marks can change without prior notice. After the exam completion, candidates receive a scorecard and a score breakdown by exam section and passing score for the given exam. Cisco does not disclose exam’s cutoff scores because exam questions and cutoff scores can change without notice.
CCNA being such an important and widely written certification exam, is a good career option for many. In this Cheat Sheet CCNA article, we provide important tips and tricks to ace this exam. In this Cheatsheet CCNA article, we will discuss what CCNA is and the different CCNA commands.
Commands and Content on Cheat sheet CCNA
Below are the Cheat sheet CCNA commands mentioned which perform different kinds of operations:
|Enter Privilege mode||Switch>enable|
|configuration mode||Switch#configure terminal|
|Global Configuration mode||Switch(config)#|
|Interface mode||Switch(config)#interface fa0/1|
|Interface mode enter||Switch(config-if)|
|Return to global config.||Switch(config-if) exit|
|Exit Global Configuration mode||Switch(config)#exit|
|Return to use mode||Switch#disable|
Keyboard Shortcuts commands:
|Description||Keyboard shortcut key|
|Recalling the last command||Up arrow or <Ctrl> p|
|Recalling Next command||Down arrow or <Ctrl> n|
|To begin of a command||<Ctrl> a|
|Command end||<Ctrl> e|
|Deleting an input||<Ctrl> d|
|Configuration Mode Exit||<Ctrl> z|
Device Configuration commands:
Cheat sheet CCNA commands for device configuration are mentioned below, which perform different kinds of operations:
|Configure the name of a device system||Switch(config)#hostname sw1|
|encrypted enable password setting up||Switch(config)#enable secret cisco|
|unencrypted enable password setting up||Switch(config)#enable password cisco|
|password encryption enabled on all clear text password inside the config file||Switch(config)#service password-encryption|
|Banner Configure a Message, along with an ending character of $||Switch(config)#banner motd $|
|Vlan IP address assignment||Switch(config)#int vlan 1
Switch(config-if)#ip addr 172.22.1.11
|Default gateway assignment||Switch(config)#ip default-gateway 10.1.1.1|
|Selecting one interface||Switch(config)#int fa0/1|
|Selecting a range of interfaces (it is version dependent)||Switch(config)#int range fa0/1 – 12|
|Setting the interface description||Switch(config-if)#description|
|Adding vlan using configuration mode||switch(config)#vlan 11 switch(config-vlan)#name test|
|Configure Interface fa0/1 @ speed 100 Mbps and full-duplex||Switch(config-if)#speed 100 Switch(config-if)#duplex full|
|Assigning an interface to vlan||switch(config-if)#switchport access vlan 11|
|Enabling Port Security.||Switch(config-if)#switchport mode access Switch(config-if)#switchport port-security Switch(config-if)#switchport port-security mac-address sticky|
|Enabling Interface||Switch(config-if)no shutdown|
|The configuration of 5 Telnet sessions with a password of ‘cisco’ in each of them||Switch(config)#line vty 0 4 Switch(config-line)#login Switch(config-line)#password cisco|
|Enablement and defining console password of ‘cisco.’||Switch(config)#line con 0 Switch(config-line)#login Switch(config-line)#password cisco|
|Synchronizing console messages||Switch(config-line)#logging synchronous|
|Setting the time-zone and automatically adjusting the same||Switch(config)#clock timezone gmt 0 Switch(config)#clock summer-time gmt recurring|
|Setting the switch priority for the vlan.||Switch(config)#spanning-tree vlan 1 priority 4096|
|Enabling portfast||Switch(config)#int fa0/1
|Enabling RSTP.||Switch(config)#spanning-tree mode rapid-pvst|
|Creating a vlan.||Switch(config)#vlan 2 Switch(config-vlan)#name sales|
|Assigning an interface to vlan 2||Switch(config-if)#switchport access vlan 2|
|forcing an interface into trunking unconditionally. access and dynamic are other options||Switch(config-if)#switchport mode trunk|
|assigning a switch to a VTP domain manually. if it’s currently in the ‘null’ domain and receives a VTP frame, then the switch will automatically become part of a VTP domain||Switch(config)#vtp domain lab|
|VTP mode changes from the default ‘server’ mode to client mode. Within client mode, no changes are possible.||Switch(config)#vtp mode client|
|Enabling the HTTP server so SDM can be used||Router(config)#ip http server|
Free Tips and Tricks of using Cheat sheet CCNA Commands
Above, we presented some important cheat sheet CCNA commands and keyboard shortcuts related to network engineering, and these are very important for keeping the CCNA examination in mind.
This section shall discuss important tricks and tips that can help students do better in the CCNA exam.
- One must get comprehensive practical knowledge and experience to pass the examination. Just reading books will not help. One must know the basics of troubleshooting and internet protocol.
- Proper study material must be obtained. There are thousands of websites, blogs, and books, but not all of them are reliable. Hence picking the right source reduces the wasting of time and effort.
- It is good practice to schedule practice tests and write a few before actual tests. This gives a great benefit in terms of time management and stress handling during the exam.
- Refresh the learned material before the examination. The syllabus of CCNA is quite comprehensive, and it may take several weeks to complete and understand everything; the proper time to time revise is necessary, and revision before examination day is a great benefit.
- With so much to read and learn, one can easily get tensed or tired, and hence it is important that one relax and take a deep breath in the last few days before the examination.
- CCNA asks for about 50-60 questions in a 90-minute duration. It is quite a lot in such a short time and hence prior practice and time management is key.
- CCNA has a very comprehensive syllabus, as mentioned below. It asks anything from TCP/IP to routing protocols to spanning trees. It requires the candidate to go through the length and breadth of the topic.
CCNA certification is proof of network expert, and hence it has a huge benefit. It is recognized globally and treated with a lot of respect from employers and peers. With this certification, a candidate can market himself to be a strong network engineer with good opportunities in the network engineering field.
With all such advantages in mind, there are many institutions and professionals who offer training courses and tutorials to pass CCNA certifications – some of them are free, while there are others who charge a hefty fee. It is advised that a candidate first spend a lot of time in self-study and then only if required opt for a paid tutorial classes.
This has been a guide to Cheat sheet CCNA here; we have discussed the content and command as well as free tips and tricks of cheat sheet CCNA; you may also look at the following article to learn more –