Introduction to Sockets
A socket is defined as a link for two-way communication for programs executed on the network. The socket is built with a port number which makes the layer of TCP to find the application of data where the information has to be reached. The socket is an endpoint that merges both port numbers and IP addresses. The programming of the socket is made to connect nodes on the network for better interaction. The one node follows the concerned port of an IP whereas the other node extends out to set up a connection. Then they form a server with a listener socket whereas the client reaches his way to connect with the server. The different types of the socket are discussed in this below article.
Top 10 Types of Sockets
In software terms, the socket behaves as an endpoint setting up a bidirectional network with a communication link between both client and server-side. In UNIX, within the operating system, the socket is called as an endpoint of inter-process communication. There are many sockets in the market which are designed on requirement like, hex socket is used to fit bolt and nut, E Torx is used for the ratchet to pass through.
The most commonly used sockets are available in four types. The most commonly used are stream and datagram whereas the rarely used are raw and packet sequenced. The presumed processes are used to interact between the same type sockets with no other limitations which stop the communication of different types of sockets.
1. Stream Sockets
These sockets are used on the delivery side of the network environment. If the user transfer via stream socket of three nodes like D, E, F, and it also accepts in the same order like D, E, and F. These three sockets use a transmission control protocol for the transmission of data. If there is no possible delivery, then the sender gets an error notification. There are no boundaries between any data records.
2. Datagram Sockets
The implementation doesn’t give any guaranteed delivery as they work connectionless. It doesn’t require any open connection like stream sockets which builds the socket with destination info and transfer it out by using user datagram protocol.
3. Raw Sockets
It is used to give the user access to find the underly protocols and communication with the support of socket abstractions. The sockets are a standard datagram oriented via the suitable behavior which is relied on the interface given by protocol. These raw sockets are not made for the general user but it greatly supports the developer who builds trending communication protocols or who are ahead to access the more facilities of cryptic in an existing protocol.
4. Packet Sequenced Sockets
It is more or less the same to stream socket but it doesn’t have any protecting boundaries. The given interface is a section of network systems that has an abstraction of sockets and is mandated in all the network applications. The packet sequenced sockets enable the user to multiply the packet sequence protocol or some internet datagram protocol which heads on the packet or a packet group by writing in the header of the prototype along with data that has to be sent. The default header has some data specification which is used to send with ongoing data and enables the user to get the incoming packets with header
5. Hex Sockets
It is the most commonly used sockets with Hex/6 points and bi-ex/12 points. It has a square socket drive at an end which is used to fix them into tuning tools like a ratchet or bi-hexagonal or hexagonal recessed sockets at another end to make them work rapidly along with bolts and nuts.
6. Socket Bit
It is the merging of hex socket and a bit of screwdriver which is made in metal piece and fixed together from two different parts. All the sockets binks are associated with a turning tool same as hex sockets or ratchet with square drive. The socket bit is linked to another end of the socket which has the fitting shape to make it rapid.
7. Impact Sockets
They are implied to use along with impacting drivers like air guns which delivers maximum torque than usual wrenches and drivers and produces more vibrations from the impacted functions. These sockets are made as highly ductile with minimum brittle steel grades which are manufactured to meet the maximum torque that impacts the vibration which makes shattering of usual sockets. The impact socket is available in varied colors and has a varied surface coating.
8. Spark Plug Sockets
It is implied to eliminate the spark plugs occurring from engines. It happens from a foam rubber which is located inner to the socket. It holds the spark plug and protects from damage against the internal wall of the socket. It should be ensured that the suitable spark plug should be fixed to the socket because the fitting of various size of spark plugs can damage the equipment and makes it impossible to dismantle.
9. Pass-through Sockets
It doesn’t have a square drive socket which is made to turn by spanner ratchet and used to fit the socket top. The socket can be hollow that allows the long bolt to enter through the hole interior to spanner of the ratchet. It means the sockets can fix into the socket and used to eliminate the nut or with long bolt where even the deep socket cannot be reached.
10. Adjustable Multi Sockets
It has attached jaws which fits to fasten the different type of processors and is also used to protect the rounding corners by placing an equivalent force in every side of sockets. It is made by contacting the head with flats which makes them fit perfectly. It is possible to adjust multi-sockets by rotating the exterior part of the socket and all enables easy movement of jaw around the clamp. These clamps make the metal part to fix into the socket easily and process it rapidly to give a better performance.
This is a guide to Types of Socket. Here we discuss an introduction to Types of Socket, top 10 different Types in detail. You can also go through our other related articles to learn more –