Become a Quality Control Manager
11 Online Courses
Verifiable Certificate of Completion
TQM Applicability in Industries14h 44m
Total Quality Management3h 48m
TQM - Decrease Errors, Increase Profit and Assure Quality7h 6m
Quality Models4h 17m
ISO 9000 Quality Management4h 38m
ISO 2700114h 27m
Lean Six sigma6h 58m
Lean Six Sigma Green Belt4h 36m
Lean Manufacturing System2h 33m
Lean Management - Waste Reduction Tools3h 8m
Defect Management with QC1h 03m
Skills you will master
- Quality Models
- ISO 9000
- ISO 27001
- Lean Six Sigma
- Lean Six Sigma Green Belt
- Lean Manufacturing System
- Lean Management
- Waste Reduction Tools
- Defect Management
In terms of business, engineering, and manufacturing setups, quality can be described as either the inferiority or superiority of a product, service, process, or output. If a product, service, process, or output fails to fit into the purpose it is slated to achieve, we can deem them as low on quality. On the other hand, if the purpose is met with and the parameters are checked successfully, we can deem the product, service, process, or output as high on quality.
Quality is a very subjective element within businesses and in order to keep the lid tight on the direction that quality points out to, we need to have fix adherence parameters and principles created to keep a check on quality at every stage of the workflow. Quality Control refers to a set of procedures that ensure that a product sticks to a curtained previously defined quality standards. It is that process which allows entities to examine the quality of every aspect of production.
Quality Control stresses on the testing of products in order to bring forward any defects in the projected working of the product and report said defects to the management that will decide upon the decision to allow/deny or modify the release of the product.
Defect Management with Quality Control:
Defect Management must incorporate Quality Control in order to preserve the basic quality standard of the product. Since defect management would involve changes in the design and working of the product, major and minor, it becomes imperative to ensure that the modified product adheres to quality standards. Therefore, understanding how defect management can be done keeping in mind quality of the product is of utmost importance while correcting defects in the given product.
A defect is any observable difference between the projected or expected result and the actual result of any activity in software development. Needless to say, defects are unforeseen and unwanted aspects of an activity and need to be detected and removed. Finding of defects is one of the primary goals of testing. Defect management focuses on catching, preventing and minimizing the impact of a defect.
As a process, it must deal with the all actions carried out from the time a defect is logged till the time it is resolved. The process can be complicated and lengthy and can include more than one involved party working simultaneously from more than a single location handling defects. The tools of defect management support the recording and managing of defects that are found during testing and mostly, also enable maintenance of reports and metrics of the same.
About Total Quality Management (TQM)
TQM is a completely structured, comprehensive, and organization-wide approach taken towards organizational structuring and management that continuously seeks to improve the quality rendered by the products, services belted out by the organization and the productivity of the resources handling the product. The aim is to continuously induce quality at each and every step of the organizational workflow in a bid to refine and fine-tune the processes and receive continuous feedback as per customers’ norms to refine still further.
TQM is different for each and every organization and is mostly linked to the manufacturing industry, but can be successfully applied to any other industry or organization. It also conforms to the various international quality standards such as the ISO 9000 family of standards.
Conducting TQM at your organization is probably the best decision your organization has ever taken, as it can be a totally life-changing experience for the organization, its employees, the management, the board, and even the customers it caters to. TQM when set in action undergo a series of 4 sequential phases: plan, do, check, and act (or, the PDCA cycle).
Plan – In this phase, the problem to be addressed is correctly defined and the necessary, relevant data is collected in a bid to find out and analyze the root cause of the problem at hand.
Do – In this phase, after the root cause is found out, a solution is concluded and developed to be implemented. Success metrics are decided and put into place, and the effectiveness meter is set in motion to determine the success of the solution.
Check – In this phase, the results that are yielded from the success metrics with a simple, yet thorough before-and-after comparison of the data.
Act – In this phase, the results of success are documented and published to inform others about different changes in the process. Other problems are also kept in mind and these documentations addresses them in the following PDCA cycle.
TQM is a versatile quality management approach that can be integrated with many other project management approaches in the market, to be able to yield desired results under the scales of performance, productivity, and quality. TQM can be readily put into collaborations with the following techniques, methodologies, and approaches to find the perfect blend of quantity and quality:
TQM with Continuous Improvement
TQM with Statistical Process Control
TQM with various quality improvement techniques, such as Ishikawa, Pareto charts, run charts, etc.
TQM with Six Sigma
TQM with Lean
TQM with Quality Circle
Each of these collaborations/integrations will be discussed in this training Program.
|TQM Applicability in Industries||✔||View All|
|Total Quality Management||✔||View All|
|TQM - Decrease Errors, Increase Profit and Assure Quality||✔||View All|
|Quality Models||✔||View All|
|ISO 9000 Quality Management||✔||View All|
|ISO 27001||✔||View All|
|Lean Six sigma - Lean Six Sigma Training Course Certification||✔||View All|
|Lean Six Sigma Green Belt||✔||View All|
|Lean Manufacturing System||✔||View All|
|Lean Management - Waste Reduction Tools||✔||View All|
|Defect Management with QC||✔||View All|
Great Value and great Class
Schedule Model Overview
Nhia Mai Lor
TQM Activity and Customers
MARYNETH DE ROXAS
Primavera P6 Project Planner Software Review
James Andrew Currie
James Nils Arthur Hepburn
Darryl D Arnold
Interesting overview of the program
Muhammad Mamdouh Amer Elsayed Muhammad
CA Nitin Sachdeva
Kandavel Murugan B
Easy & comprehensive
Great for Engineering
- Can I access this course from anywhere?
Yes, you can definitely access this course from anywhere & everywhere. Once you are registered for this Online Training Bundle, you will get your own login credentials which you can use to access the video materials and other contents from anywhere.
- Is there a Classroom Training available for this Online Training?
All our courses are available online so as to enable any user, who may have limited time, to study his courses of choice online. The training materials are accessible 24*7 for the users.
- Who are the Instructors for this Online Training?
The instructors are Industry based professional who have had tons of experience in the field of Online Training. All the courses in this bundle are based on Industry based standards. Also the courses have been started from Scratch to get the participant well-acquainted with each and every Online Training concept.
- Are there any Certification Courses for Online Training available in this Online Training bundle?
Yes, there are certification courses available for the same in this Ultimate Online Training Bundle. To name a few- PMI-ACP Exam Prep – PMI Agile Certified Practitioner Training, PMP Exam Prep Training, NCFM based Modules, ITIL Modules, CFA Training etc.
- When will I receive my certificate for any course?
You will receive certificate for completing each course in the Online Training Bundle. Once you have seen more than 70% of the training material in any course, you can issue your certificate.
- Are there any Pre-requisites for enrolling to this Online Training Bundle?
No, there are no pre-requisites for this training. Anyone who is keen to learn about specific Industry based domains can enroll for this Ultimate bundle.
- Will I get any technical Support during my Training at eduCBA?
Yes, you will be getting technical Support from eduCBA. In case you have any technical issue, you can drop us a mail or call us to get your doubts cleared.
- What are the Payment Options?
There are both Online & Offline Payment options available. In online payment options you pay by Credit Card, Debit Card or Net Banking. In offline payment option you can deposit Cash, Cheque or Demand Draft.
- What if I have more Queries?
Just drop us a mail on email@example.com